Shenzhen Kai Mo Rui Electronic Technology Co. LTDShenzhen Kai Mo Rui Electronic Technology Co. LTD

News

How Do Network Cameras Work?

Source:Shenzhen Kai Mo Rui Electronic Technology Co. LTD2026-11-20

With the continuous improvement of people’s living standards, network cameras have become increasingly common in daily life. Like most devices, network cameras range from simple to complex. Once you grasp the essentials of a basic network‑camera setup, higher complexity only means adding more features via software, custom codes and/or device connections. Do you know how network cameras work? If not, please read the introduction prepared by the technical staff from Kaimorui.

18.jpg

Working Principle of Network Cameras

In general, the working process is as follows: Light from the scene passes through the lens (LENS) and projects an optical image onto the surface of the image sensor. The optical image is then converted into electrical signals. After A/D (analog‑to‑digital) conversion, these signals become digital image signals. Next, the digital signals are sent to a Digital Signal Processor (DSP) for processing and video encoding‑compression. Compressed data is transmitted over network cables. On the receiving end, users can access and decode the video directly with a computer for viewing, or display footage via decoding devices.

After the camera system inside a network camera converts the optical image of the target object into corresponding electrical signals, a signal source for recording is generated. The recording system converts the incoming electrical signals from the signal source into magnetic signals through an electromagnetic conversion system and stores them on video tapes. To play back recorded content via the camera’s playback system, press relevant control keys. Magnetic signals stored on video tapes are converted back into electrical signals. After amplification, the electrical signals are output to a TV screen to form visible images.

Raw data captured by network cameras cannot be processed directly by the CPU. The main control chip integrates a camera controller called FIMC (Fully Interactive Mobile Camera). The camera first transfers image data to this controller. After processing (cropping and scaling for direct preview or encoding), data is forwarded to the CPU. In fact, the operating clock signal (MCLK) required for camera operation is also provided by FIMC.

The controller serves as the core of a network camera and takes charge of device management and control. For hardware‑based encoding and compression, the controller is an independent component. For software‑based encoding‑compression, the controller is the DSP that runs compression software, meaning the two functions are combined within one chip.

There are two types of image encoding‑compression technologies. One is hardware encoding‑compression, where compression algorithms are embedded into chips. The other is DSP‑based software encoding‑compression, in which compression software runs on the DSP chip to process images. Similarly, audio compression can also adopt hardware or software solutions, with MP3 among the available encoding standards.

From the above workflow, we can see that a basic camera architecture consists of three core components: the lens (LENS), the image sensor (CMOS SENSOR), and the Digital Signal Processor (DSP).

Related News

Professional Engineer

24-hour online serviceSubmit requirements and quickly customize solutions for you

+8613798538021